Dike City Power Plant

🛢 OilElectric Utility2 MW capacity

251st largest plant in Iowa · 10066th nationally

Dike City Power Plant is a oil power plant in Iowa with a nameplate capacity of 2.2 MW. It generates roughly 60 MWh per year — enough to power about 5 average U.S. homes.

Its capacity factor of 0% reflects intermittent or peaking operation. At 1764 lb CO₂/MWh, its emission rate sits above the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%0%
Peaking — intermittent or backup
Capacity2 MWnameplate
Annual Generation60 MWhEPA eGRID
Capacity Factor0%of theoretical max
Annual CO₂53metric tons

Location

Plant NameDike City Power Plant
OperatorCity Of Dike
CityDike
CountyGrundy County
StateIowa
ZIP50624
Coordinates42.46220, -92.62640

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

Natural GasOilWindSolar

Generators (1)

IDTechnologyFuelCapacityStatusOnline
001Petroleum LiquidsDistillate Oil2.2 MWOperating2005

Emissions (annual)

CO₂53 metric tons
NOₓ1 metric tons
CO₂ Rate1764 lb/MWh
U.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhThis plant1,763 lb/MWhCoal plant average2,100 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionMRO
Balancing AuthorityMidcontinent Independent Transmission System Operator, Inc..

About Oil plants

Oil-fired plants typically run only during peak demand or grid emergencies because oil is expensive compared to gas and coal. They have the highest CO₂ emissions per MWh of any common generation technology.

Other plants in Grundy County

View all plants in Grundy County →

Explore more