Hamilton Peaking

🔥 Natural GasElectric Utility32 MW capacity

72nd largest plant in Ohio · 4113th nationally

Hamilton Peaking is a natural gas power plant in Ohio with a nameplate capacity of 32.0 MW. It generates roughly 1.5k MWh per year — enough to power about 143 average U.S. homes.

Its capacity factor of 1% reflects intermittent or peaking operation. At 1830 lb CO₂/MWh, its emission rate sits above the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%1%
Peaking — intermittent or backup
Capacity32 MWnameplate
Annual Generation1.5k MWhEPA eGRID
Capacity Factor1%of theoretical max
Annual CO₂1.4kmetric tons

Location

Plant NameHamilton Peaking
OperatorAmerican Mun Power-Ohio, Inc
CityHamilton
CountyButler County
StateOhio
ZIP45015
Coordinates39.35280, -84.51830

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

Natural GasCoalOilHydroelectricSolar

Generators (1)

IDTechnologyFuelCapacityStatusOnline
1Natural Gas Fired Combustion TurbineNatural Gas32.0 MWOperating2000

Emissions (annual)

CO₂1.4k metric tons
NOₓ2 metric tons
CO₂ Rate1830 lb/MWh
U.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhThis plant1,829 lb/MWhCoal plant average2,100 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionRFC
Balancing AuthorityPjm Interconnection, Llc

About Natural Gas plants

Natural gas plants are the workhorse of the modern grid. Combined-cycle units achieve very high efficiency and can ramp up and down quickly to balance variable renewables. They emit roughly half the CO₂ per MWh of coal and far less of other pollutants, but they still release upstream methane during fuel extraction.

Other plants in Butler County

View all plants in Butler County →

Explore more