Harlan

🛢 OilElectric Utility3 MW capacity

222nd largest plant in Iowa · 8898th nationally

Harlan is a oil power plant in Iowa with a nameplate capacity of 3.4 MW. It generates roughly 6 MWh per year — enough to power about 0 average U.S. homes.

Its capacity factor of 0% reflects intermittent or peaking operation. At 1960 lb CO₂/MWh, its emission rate sits above the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%0%
Peaking — intermittent or backup
Capacity3 MWnameplate
Annual Generation6 MWhEPA eGRID
Capacity Factor0%of theoretical max
Annual CO₂6metric tons

Location

Plant NameHarlan
OperatorHarlan Municipal Utilities - (Ia)
CityHarlan
CountyShelby County
StateIowa
ZIP51537
Coordinates41.64454, -95.31528

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

Natural GasOilWind

Generators (2)

IDTechnologyFuelCapacityStatusOnline
HMU1Petroleum LiquidsDistillate Oil1.7 MWStandby2001
HMU2Petroleum LiquidsDistillate Oil1.7 MWStandby2001

Emissions (annual)

CO₂6 metric tons
CO₂ Rate1960 lb/MWh
U.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhThis plant1,960 lb/MWhCoal plant average2,100 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionMRO
Balancing AuthorityMidcontinent Independent Transmission System Operator, Inc..

About Oil plants

Oil-fired plants typically run only during peak demand or grid emergencies because oil is expensive compared to gas and coal. They have the highest CO₂ emissions per MWh of any common generation technology.

Explore more