Lake (Wy)

🛢 OilElectric Utility2 MW capacity

69th largest plant in Wyoming · 9652nd nationally

Lake (Wy) is a oil power plant in Wyoming with a nameplate capacity of 2.7 MW. It generates roughly 252 MWh per year — enough to power about 24 average U.S. homes.

Its capacity factor of 1% reflects intermittent or peaking operation. At 1817 lb CO₂/MWh, its emission rate sits above the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%1%
Peaking — intermittent or backup
Capacity3 MWnameplate
Annual Generation252 MWhEPA eGRID
Capacity Factor1%of theoretical max
Annual CO₂229metric tons

Location

Plant NameLake (Wy)
OperatorNorthwestern Energy (Mt Wind/Thermal)
CityYellowstone
CountyTeton County
StateWyoming
ZIP82190
Coordinates44.41500, -110.57390

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

Oil

Generators (1)

IDTechnologyFuelCapacityStatusOnline
1Petroleum LiquidsDistillate Oil2.7 MWStandby1967

Emissions (annual)

CO₂229 metric tons
NOₓ4 metric tons
CO₂ Rate1817 lb/MWh
U.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhThis plant1,817 lb/MWhCoal plant average2,100 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionWECC
Balancing AuthorityNorthwestern Energy (Nwmt)

About Oil plants

Oil-fired plants typically run only during peak demand or grid emergencies because oil is expensive compared to gas and coal. They have the highest CO₂ emissions per MWh of any common generation technology.

Other plants in Teton County

View all plants in Teton County →

Explore more