Pawhuska

🛢 OilElectric Utility9 MW capacity

122nd largest plant in Oklahoma · 6020th nationally

Pawhuska is a oil power plant in Oklahoma with a nameplate capacity of 9.0 MW. It generates roughly 375 MWh per year — enough to power about 35 average U.S. homes.

Its capacity factor of 0% reflects intermittent or peaking operation. At 1832 lb CO₂/MWh, its emission rate sits above the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%0%
Peaking — intermittent or backup
Capacity9 MWnameplate
Annual Generation375 MWhEPA eGRID
Capacity Factor0%of theoretical max
Annual CO₂343metric tons

Location

Plant NamePawhuska
OperatorCity Of Pawhuska - (Ok)
CityPawhuska
CountyOsage County
StateOklahoma
ZIP74056
Coordinates36.66942, -96.34741

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

OilWind

Generators (4)

IDTechnologyFuelCapacityStatusOnline
3Petroleum LiquidsDistillate Oil3.1 MWOperating1966
5Petroleum LiquidsDistillate Oil2.5 MWOperating1960
2Petroleum LiquidsDistillate Oil2.0 MWOperating1954
1Petroleum LiquidsDistillate Oil1.4 MWOut of Service1949

Emissions (annual)

CO₂343 metric tons
SO₂1 metric tons
NOₓ7 metric tons
CO₂ Rate1832 lb/MWh
U.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhThis plant1,831 lb/MWhCoal plant average2,100 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionMRO
Balancing AuthoritySouthwest Power Pool

About Oil plants

Oil-fired plants typically run only during peak demand or grid emergencies because oil is expensive compared to gas and coal. They have the highest CO₂ emissions per MWh of any common generation technology.

Other plants in Osage County

View all plants in Osage County →

Explore more