Pender

🛢 OilElectric Utility4 MW capacity

82nd largest plant in Nebraska · 7877th nationally

Pender is a oil power plant in Nebraska with a nameplate capacity of 4.9 MW. It generates roughly 46 MWh per year — enough to power about 4 average U.S. homes.

Its capacity factor of 0% reflects intermittent or peaking operation. At 1875 lb CO₂/MWh, its emission rate sits above the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%0%
Peaking — intermittent or backup
Capacity5 MWnameplate
Annual Generation46 MWhEPA eGRID
Capacity Factor0%of theoretical max
Annual CO₂43metric tons

Location

Plant NamePender
OperatorCity Of Pender - (Ne)
CityPender
CountyThurston County
StateNebraska
ZIP68047
Coordinates42.11474, -96.70543

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

Natural GasCoalOilWindSolar

Generators (5)

IDTechnologyFuelCapacityStatusOnline
2Petroleum LiquidsDistillate Oil2.0 MWOperating1973
1Petroleum LiquidsDistillate Oil1.5 MWOperating1968
4Petroleum LiquidsDistillate Oil0.9 MWOperating1961
3Petroleum LiquidsDistillate Oil0.5 MWOut of Service1953
5Natural Gas Internal Combustion EngineNatural Gas0.2 MWRetired1939

Emissions (annual)

CO₂43 metric tons
NOₓ1 metric tons
CO₂ Rate1875 lb/MWh
U.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhThis plant1,874 lb/MWhCoal plant average2,100 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionMRO
Balancing AuthoritySouthwest Power Pool

About Oil plants

Oil-fired plants typically run only during peak demand or grid emergencies because oil is expensive compared to gas and coal. They have the highest CO₂ emissions per MWh of any common generation technology.

Explore more