Wilber

🛢 OilElectric Utility3 MW capacity

93rd largest plant in Nebraska · 8730th nationally

Wilber is a oil power plant in Nebraska with a nameplate capacity of 3.6 MW. It generates roughly 33 MWh per year — enough to power about 3 average U.S. homes.

Its capacity factor of 0% reflects intermittent or peaking operation. At 1960 lb CO₂/MWh, its emission rate sits above the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%0%
Peaking — intermittent or backup
Capacity4 MWnameplate
Annual Generation33 MWhEPA eGRID
Capacity Factor0%of theoretical max
Annual CO₂32metric tons

Location

Plant NameWilber
OperatorCity Of Wilber
CityWilber
CountySaline County
StateNebraska
ZIP68465
Coordinates40.47970, -96.96040

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

Natural GasCoalOilWindSolar

Generators (3)

IDTechnologyFuelCapacityStatusOnline
6Petroleum LiquidsDistillate Oil1.6 MWOperating1997
4Petroleum LiquidsDistillate Oil1.1 MWOperating1960
5Petroleum LiquidsDistillate Oil0.9 MWOperating1960

Emissions (annual)

CO₂32 metric tons
NOₓ1 metric tons
CO₂ Rate1960 lb/MWh
U.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhThis plant1,959 lb/MWhCoal plant average2,100 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionMRO
Balancing AuthoritySouthwest Power Pool

About Oil plants

Oil-fired plants typically run only during peak demand or grid emergencies because oil is expensive compared to gas and coal. They have the highest CO₂ emissions per MWh of any common generation technology.

Other plants in Saline County

View all plants in Saline County →

Explore more