Power Plants Near 40964 — Mary Alice, KY
15 power plants within 50 miles of ZIP 40964 (Mary Alice, Kentucky). Click any plant for capacity, generation, emissions, and generator-level detail.
Centroid: 36.7843, -83.3299 · County: Harlan
| Distance | Plant | Fuel | Capacity | Operator |
|---|---|---|---|---|
| 22.0 mi | Powell Valley Kyles Ford, TN | Oil | 22 MW | Powell Valley Electric Coop |
| 23.9 mi | Pineville Four Mile, KY | Coal | — | Kentucky Utilities Co |
| 34.7 mi | John Sevier Rogersville, TN | Natural Gas | 997 MW | Tennessee Valley Authority |
| 35.0 mi | Bright Mountain Solar Hazard, KY | Solar | — | Avangrid Power Llc |
| 37.5 mi | Greater Wise Solar Project Norton, VA | Solar | — | Bq Energy Development |
| 43.6 mi | Cherokee Dam Rudledge, TN | Hydroelectric | 135 MW | Tennessee Valley Authority |
| 44.0 mi | Sr Albany, Llc Greenville, TN | Solar | — | Sr Albany, Llc |
| 44.9 mi | Starfire Mountain Solar Talcum, KY | Solar | — | Brightnight Power |
| 45.3 mi | Domtar Kingsport Mill Kingsport, TN | Natural Gas | 50 MW | Domtar Paper Co Llc Kingsport Mill |
| 45.6 mi | Laurel Ridge Lfgte Lily, KY | Biomass | 4 MW | East Kentucky Power Coop, Inc |
| 45.7 mi | Sr White Pine, Llc White Pine, TN | Solar | 2 MW | Sr White Pine, Llc |
| 46.8 mi | Mineral Gap Wise, VA | Solar | 3 MW | Madison Energy Investments Llc |
| 47.2 mi | Tennessee Eastman Operations Kingsport, TN | Other Fossil | 194 MW | Eastman Chemical Co-Tn Ops |
| 48.7 mi | Sr Greenville I Limestone, TN | Solar | 5 MW | Sr Greenville I, Llc |
| 49.6 mi | Fort Patrick Henry Kingsport, TN | Hydroelectric | 59 MW | Tennessee Valley Authority |
Power generation near this area
There are 15 power plants within 50 miles of Mary Alice, Kentucky (ZIP 40964), with a combined 1,471 MW of nameplate capacity. Solar is the most common fuel type in this area with 7 of the 15 nearby plants. The closest plant is Powell Valley at 22.0 miles.
Nameplate capacity is the maximum output a plant can produce under ideal conditions — actual generation depends on fuel availability, demand, and maintenance schedules. Capacity factor (shown on individual plant pages) measures how much of that theoretical maximum a plant actually delivers over a year. Nuclear plants typically run above 90%; solar and wind range from 20–45% depending on location and weather.
All data comes from federal EIA and EPA releases. For a printable version of this proximity search, use the report link below. To explore all plants in Kentucky, visit the Kentucky state page.
← Search a different location · Printable proximity report →