Anderson Erickson

🛢 OilIndustrial Non-CHP2 MW capacity

253rd largest plant in Iowa · 10231st nationally

Anderson Erickson is a oil power plant in Iowa with a nameplate capacity of 2.0 MW. It generates roughly 27 MWh per year — enough to power about 2 average U.S. homes.

Its capacity factor of 0% reflects intermittent or peaking operation. At 2456 lb CO₂/MWh, its emission rate sits above the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%0%
Peaking — intermittent or backup
Capacity2 MWnameplate
Annual Generation27 MWhEPA eGRID
Capacity Factor0%of theoretical max
Annual CO₂33metric tons

Location

Plant NameAnderson Erickson
OperatorAnderson Erickson Dairy
CityDes Moines
CountyPolk County
StateIowa
ZIP50317
Coordinates41.60140, -93.57650

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

Natural GasCoalOilWindBiomass

Generators (1)

IDTechnologyFuelCapacityStatusOnline
1Petroleum LiquidsDistillate Oil2.0 MWOperating2000

Emissions (annual)

CO₂33 metric tons
NOₓ1 metric tons
CO₂ Rate2456 lb/MWh
U.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhCoal plant average2,100 lb/MWhThis plant2,455 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionMRO
Balancing AuthorityMidcontinent Independent Transmission System Operator, Inc..

About Oil plants

Oil-fired plants typically run only during peak demand or grid emergencies because oil is expensive compared to gas and coal. They have the highest CO₂ emissions per MWh of any common generation technology.

Other plants in Polk County

View all plants in Polk County →

Explore more