Drexel Operations Center

🛢 OilElectric Utility2 MW capacity

749th largest plant in North Carolina · 10066th nationally

Drexel Operations Center is a oil power plant in North Carolina with a nameplate capacity of 2.2 MW. It generates roughly 5 MWh per year — enough to power about 0 average U.S. homes.

Its capacity factor of 0% reflects intermittent or peaking operation. At 16365 lb CO₂/MWh, its emission rate sits above the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%0%
Peaking — intermittent or backup
Capacity2 MWnameplate
Annual Generation5 MWhEPA eGRID
Capacity Factor0%of theoretical max
Annual CO₂41metric tons

Location

Plant NameDrexel Operations Center
OperatorNorth Carolina Mun Power Agny #1
CityDrexel
CountyBurke County
StateNorth Carolina
ZIP28619
Coordinates35.74810, -81.60720

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

Natural GasOilHydroelectricSolar

Generators (1)

IDTechnologyFuelCapacityStatusOnline
1Petroleum LiquidsDistillate Oil2.2 MWOperating2007

Emissions (annual)

CO₂41 metric tons
NOₓ1 metric tons
CO₂ Rate16365 lb/MWh
U.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhCoal plant average2,100 lb/MWhThis plant16,365 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionSERC
Balancing AuthorityDuke Energy Carolinas

About Oil plants

Oil-fired plants typically run only during peak demand or grid emergencies because oil is expensive compared to gas and coal. They have the highest CO₂ emissions per MWh of any common generation technology.

Other plants in Burke County

View all plants in Burke County →

Explore more