Stryker

🛢 OilIPP Non-CHP19 MW capacity

80th largest plant in Ohio · 4902nd nationally

Stryker is a oil power plant in Ohio with a nameplate capacity of 19.0 MW. It generates roughly 27 MWh per year — enough to power about 2 average U.S. homes.

Its capacity factor of 0% reflects intermittent or peaking operation. At 3273 lb CO₂/MWh, its emission rate sits above the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%0%
Peaking — intermittent or backup
Capacity19 MWnameplate
Annual Generation27 MWhEPA eGRID
Capacity Factor0%of theoretical max
Annual CO₂44metric tons

Location

Plant NameStryker
OperatorRichland-Stryker Generation Llc
CityStryker
CountyWilliams County
StateOhio
ZIP43557
Coordinates41.50140, -84.42830

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

Natural GasOilHydroelectricWindSolarBiomass

Generators (1)

IDTechnologyFuelCapacityStatusOnline
1Petroleum LiquidsDistillate Oil19.0 MWOperating1968

Emissions (annual)

CO₂44 metric tons
CO₂ Rate3273 lb/MWh
U.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhCoal plant average2,100 lb/MWhThis plant3,272 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionRFC
Balancing AuthorityPjm Interconnection, Llc

About Oil plants

Oil-fired plants typically run only during peak demand or grid emergencies because oil is expensive compared to gas and coal. They have the highest CO₂ emissions per MWh of any common generation technology.

Other plants in Williams County

View all plants in Williams County →

Explore more