Henkel U.s. Operations Corporation

🌬 WindIndustrial Non-CHP3 MW capacity

640th largest plant in New York · 8898th nationally

Henkel U.s. Operations Corporation is a wind power plant in New York with a nameplate capacity of 3.4 MW. It generates roughly 899 MWh per year — enough to power about 85 average U.S. homes.

Its capacity factor of 3% reflects intermittent or peaking operation.

PeakingMid-meritBaseload0%40%80%100%3%
Peaking — intermittent or backup
Capacity3 MWnameplate
Annual Generation899 MWhEPA eGRID
Capacity Factor3%of theoretical max
Annual CO₂metric tons

Location

Plant NameHenkel U.s. Operations Corporation
OperatorHenkel U.s. Operations Corporation
CityGeneva
CountyOntario County
StateNew York
ZIP14456
Coordinates42.88694, -76.96833

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

Natural GasHydroelectricWindSolarBiomass

Generators (2)

IDTechnologyFuelCapacityStatusOnline
WT1Onshore Wind TurbineWind1.7 MWOperating2012
WT2Onshore Wind TurbineWind1.7 MWOperating2012

Grid context

NERC RegionNPCC
Balancing AuthorityNew York Independent System Operator

About Wind plants

Wind farms harvest kinetic energy from moving air using large rotor blades coupled to generators. Like solar, they produce zero emissions but vary with weather. Onshore wind capacity factors typically run 30–45%; offshore can exceed 50%.

Other plants in Ontario County

View all plants in Ontario County →

Explore more