Melrose 2

🛢 OilElectric Utility1 MW capacity

442nd largest plant in Minnesota · 12726th nationally

Melrose 2 is a oil power plant in Minnesota with a nameplate capacity of 1.0 MW. It generates roughly 2 MWh per year — enough to power about 0 average U.S. homes.

Its capacity factor of 0% reflects intermittent or peaking operation. At 2287 lb CO₂/MWh, its emission rate sits above the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%0%
Peaking — intermittent or backup
Capacity1 MWnameplate
Annual Generation2 MWhEPA eGRID
Capacity Factor0%of theoretical max
Annual CO₂2metric tons

Location

Plant NameMelrose 2
OperatorMelrose Public Utilities
CityMelrose
CountyStearns County
StateMinnesota
ZIP56352
Coordinates45.67639, -94.80194

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

OilWindSolar

Generators (1)

IDTechnologyFuelCapacityStatusOnline
12286Petroleum LiquidsDistillate Oil1.0 MWOperating2014

Emissions (annual)

CO₂2 metric tons
CO₂ Rate2287 lb/MWh
U.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhCoal plant average2,100 lb/MWhThis plant2,287 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionMRO
Balancing AuthorityMidcontinent Independent Transmission System Operator, Inc..

About Oil plants

Oil-fired plants typically run only during peak demand or grid emergencies because oil is expensive compared to gas and coal. They have the highest CO₂ emissions per MWh of any common generation technology.

Other plants in Stearns County

View all plants in Stearns County →

Explore more