Us Gypsum Oakfield

🔥 Natural GasIndustrial CHP5 MW capacity

292nd largest plant in New York · 6779th nationally

Us Gypsum Oakfield is a natural gas power plant in New York with a nameplate capacity of 5.8 MW. It generates roughly 15.8k MWh per year — enough to power about 1,506 average U.S. homes.

Its capacity factor of 31% reflects intermittent or peaking operation. At 655 lb CO₂/MWh, its emission rate sits below the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%31%
Peaking — intermittent or backup
Capacity6 MWnameplate
Annual Generation15.8k MWhEPA eGRID
Capacity Factor31%of theoretical max
Annual CO₂5.2kmetric tons

Location

Plant NameUs Gypsum Oakfield
OperatorU S Gypsum Co
CityOakfield
CountyGenesee County
StateNew York
ZIP14125
Coordinates43.06470, -78.29720

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

Natural GasHydroelectricWindSolar

Generators (1)

IDTechnologyFuelCapacityStatusOnline
GEN1Natural Gas Fired Combustion TurbineNatural Gas5.8 MWOperating1986

Emissions (annual)

CO₂5.2k metric tons
NOₓ14 metric tons
CO₂ Rate655 lb/MWh
This plant654 lb/MWhU.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhCoal plant average2,100 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionNPCC
Balancing AuthorityNew York Independent System Operator

About Natural Gas plants

Natural gas plants are the workhorse of the modern grid. Combined-cycle units achieve very high efficiency and can ramp up and down quickly to balance variable renewables. They emit roughly half the CO₂ per MWh of coal and far less of other pollutants, but they still release upstream methane during fuel extraction.

Other plants in Genesee County

View all plants in Genesee County →

Explore more