Cleveland Peaking

🛢 OilElectric Utility10 MW capacity

95th largest plant in Ohio · 5556th nationally

Cleveland Peaking is a oil power plant in Ohio with a nameplate capacity of 10.8 MW. It generates roughly 187 MWh per year — enough to power about 17 average U.S. homes.

Its capacity factor of 0% reflects intermittent or peaking operation. At 1336 lb CO₂/MWh, its emission rate sits above the national grid average of roughly 800 lb/MWh.

PeakingMid-meritBaseload0%40%80%100%0%
Peaking — intermittent or backup
Capacity11 MWnameplate
Annual Generation187 MWhEPA eGRID
Capacity Factor0%of theoretical max
Annual CO₂125metric tons

Location

Plant NameCleveland Peaking
OperatorAmerican Mun Power-Ohio, Inc
CityCleveland
CountyCuyahoga County
StateOhio
ZIP44114
Coordinates41.55671, -81.58823

This plant highlighted in navy-ringed pin; other generators within 25 miles shown as fuel-colored dots.

Natural GasCoalOilWindSolarBiomass

Generators (6)

IDTechnologyFuelCapacityStatusOnline
1Petroleum LiquidsDistillate Oil1.8 MWOperating2000
2Petroleum LiquidsDistillate Oil1.8 MWOperating2000
3Petroleum LiquidsDistillate Oil1.8 MWOperating2000
4Petroleum LiquidsDistillate Oil1.8 MWOperating2000
5Petroleum LiquidsDistillate Oil1.8 MWOperating2000
6Petroleum LiquidsDistillate Oil1.8 MWOperating2000

Emissions (annual)

CO₂125 metric tons
NOₓ2 metric tons
CO₂ Rate1336 lb/MWh
U.S. grid average800 lb/MWhNatural gas combined-cycle average900 lb/MWhThis plant1,336 lb/MWhCoal plant average2,100 lb/MWh

Annual totals and CO₂ rate reported by EPA eGRID for 2023. Reference averages are approximate U.S.-wide figures from the same dataset.

Grid context

NERC RegionRFC
Balancing AuthorityPjm Interconnection, Llc

About Oil plants

Oil-fired plants typically run only during peak demand or grid emergencies because oil is expensive compared to gas and coal. They have the highest CO₂ emissions per MWh of any common generation technology.

Other plants in Cuyahoga County

View all plants in Cuyahoga County →

Explore more